Circularsaw Clamp

If circular saws are to be filed when off the machine, it is very desirable to have a clamp that will hold the saw at a height convenient for the worker and in such a way that little or no vibration occurs at the point where the filing is being done. It is also very desirable to have a clamp that is readily portable, in order to be independent of shop facilities.

A satisfactory circular-saw clamp is shown in Figure 78. It consists of a piece of 2 by 4, 48 in. long, which is used as a post, and a piece of board, 1 by 4 by 34 in., which serves as a clamp, and is drawn against the post with a by 4-in. bolt. A number of holes are bored through both post and clamp on a center line, and the bolt is placed in the hole as determined by the diameter of the saw. Two pieces of board, 1 by 4 by 4 in.,

Post clflrip j f/oles ├┤olt

Post clflrip

Was this article helpful?

0 0
Woodworking Tools and Installation Tips

Woodworking Tools and Installation Tips

There are a lot of things that either needs to be repaired, or put together when youre a homeowner. If youre a new homeowner, and have just gotten out of apartment style living, you might want to take this list with you to the hardware store. From remolding jobs to putting together furniture you can use these 5 power tools to get your stuff together. Dont forget too that youll need a few extra tools for other jobs around the house.

Get My Free Ebook


Post a comment