Tribucide P75

Active Ingredients:

Inert Ingredients: 99 . 25%

Total 100.00%

Physical Properties

Boiling Range 300-400F

% Volatile by Volume 98%

KOPPERS CO., INC.: WOLMAN Treat 00 Ready-to-Use Wood Preservative for Field Treatment:

General:

WOLMAN Treat 00 wood preservative shall be used only for field treatment of previously WOLMANI ZED pressure treated lumber, piling or plywood to help protect against decay causing fungi and termite attack. It conforms to AWPA Standard M-4.

Product Characteristics:

Description: A clear green mineral spirits based liquid with a mild petroleum-1 ike odor.

Application: Exposed cut ends of WOLMANI ZED pressure treated wood members may be treated by liberally brushing on two coats to insure total surface coverage. Do not use on non WOLMANI ZED pressure treated wood. All cutting, framing and boring on lumber or timber be should completed prior to brush treatment.

Acceptance: Conforms to MIL-W-18124B Type A. Conforms to AWPA Standards P8 and M-4. EPA Reg. No. 61-172. EPA Est. 453-MO-l.

Ingredients:

Active: Copper Naphthenate 21.6% Inert: Petroleum solvent 78.4%

Physical Properties:

Boiling Range: 300 to 400F % Volatile by volume: 81% to 85%

For Industrial Use Only

General:

The fungicide is recognized as effective for above ground use only and not recommended for ground contact. It has been developed for the protection of wood against fungi which cause mold, mildew, decay and stain. It also contains water repellents that aid in the control of shrinking, swelling, end checking, grain raising and warping.

Product Characteristics:

Description: A clear green liquid having a mild petroleum odor.

Use: Apply to the individual components for the manufacture of log homes, pallets, military walk-in refrigerators, wooden extension ladders, or other wood items for protection against fungal growths. WOODTREAT C81 meets the requirements of MIL-R-10932J which specifies a wood preservative formulation for military walk-in refrigerators, prefabricated panel type. This type formulation is also recognized and accepted by the U.S. Department of Agriculture for wood preservation in meat and poultry processing establishments. Water repellents are also contained in this solution for the control of dimensional stability for maximum protection.

Acceptance:

Meets Federal Specification TTW-572b Composition D EPA Reg. No. 453-285 EPA Est. 453-MO-l

MIL-R-10932J (refrigerator, prefab, van type) MIL-STD-1223J (refrigerator van bodies) AWPA Standard P-8

CFR Title 21, Section 178.3800(may be safely used on wooden articles that are used in packaging, transporting or holding raw agricultural products).

Ingredients:

Active: Copper-8-quinolinolate-1%

Inert: Mineral spirit solvents and water repellents-99%

Physical Properties:

Boiling Range 300 to 400F % volatile by volume 95%

KOPPERS CO., INC.: WOODTREAT MB Ready-to-Use Water Repellent Wood Preservative:

For Industrial Use Only

General:

WOOD TREAT MB RTU is a water repellent wood preservative.

This solution has been specially formulated for the treatment of millwork prior to factory or field priming. It is also effective on partic1eboard, plywood, and other dry wood products requiring protection.

Product Characteristics:

Description: Clear liquid with mild petroleum solvent odor.

Use: WOODTREAT MB is used for the treatment of sash and other millwork to meet the Seal of Approval program of the NWWDA for a preservative water repellent (IS-4). It is also useful for the treatment of other dry wood products where the benefits of a preservative solution are desired that will help control fungus growths which cause rot, mold and stain. It contains water repellents to aid in the control of shrinking, swelling, end checking, grain raising and warping. WOODTREAT MB may be applied by the vacuum, immersion, brush or flooding methods.

Woodtreat MB Ready-to-use EPA Reg. No. 453-298 EPA Est No. 435-MO-l

Active Ingredients:

3-iodo-2-propyny1 butyl carbamate 0.50%

Inert Ingredients 99.50%

Total

100.00%

Physical Properties: Boi1ing Range % Volatile by Volume

313-354F 99.0%

For Industrial Use Only

General :

WOODTREAT WB CoucenIrate wood preservative is dilutable with water to provide a ready-to-use water repellent wood preservative which can be applied to wood by dip, soak, brush application method. The preservative helps control wood destroying fungi, staining and mold organisms. It also provides water repellency which helps control weathering, shrinking and swelling of wood. This preservative helps control wood destroying fungi, staining and mold organisms. It also provides water repellency which helps control weathering, shrinking and swelling of wood. This preservative is recommended for above ground use only.

Product Characteristics:

Description: WOODTREAT WB Concent rat o is a clear amber ution with a mild petroleum odor. When diluted with it forms a white emulsion.

Directions for Use:

Exterior Millwork: Apply by dipping, flooding or brushing to exterior millwork and other wood products for protection against wood decay, mold and stain causing fungi.

Paintabi1ity: When used according to recommended methods of treatment, tests have shown that WOODTREAT WB produces an excellent paintable surface with no drying problems, paint discoloration and incompatibility.

Acceptance: EPA Reg. 453-284

Ingredients :

Active :

3-Iodo-2-propynyl butyl carbamate

Inerts:

LEFFINGWELL: NUTRA-SPRAY COPPER FUNGICIDES: Product Name:

NUTRA-SPRAY COPPER BORDEAUX 22: Active Ingredient:

Copper (expressed as elemental) 22.0%

Inert Ingredients: 78.0%

Copper derived from Hydrated Basic Copper Sulfate. NUTRA-SPRAY Copper Bordeaux 22 is a chemically reacted, spray dried product for general use as a copper fungicide.

NUTRA-SPRAY BASIC COPPER CARBONATE: Active Ingredient:

Copper (expressed as metallic) 51.0%

Inert Ingredients: 49.0%

Copper derived from Basic Copper Carbonate.

A Copper Fungicide for General Use - A Spray Dried Product

BIOMET TBTF is an organotin compound for use in shipbottom paints to control the attachment of marine fouling organisms. BIOMET TBTF has been used successfully in a variety of coating formulations and in combinations with other additives to provide broad spectrum control of marine fouling organisms, thereby contributing to speed and operating economy of both commercial ships and pleasure craft.

The Advantages of BIOMET TBTF are:

- Chemical compatibility (non reactive) with coating ingredients

- Allows development of formulations with a full range of colors

- Noncorrosive to aluminum and steel

- Low water solubility

- Broad spectrum control of marine life including Barnacles-Algae-Tube Worms-Hydroids

Typical Properties Physical form Active Ingredient** Tin Content Specific Gravity Solubility

Relatively insoluble in water and organic solvents

**Tin basis

EPA Labeling

BIOMET TBTF brand of tri-butyltin fluoride has been registered as an economic poison with the EPA by M&T--Registration No. 5204-19. Paint formulations have also been registered with EPA by M&T Chemicals, Inc.

It should be noted that each manufacturer must register his own formulation.

M&T CHEMICALS, INC.: BIOMET TBTO Antifoulant Bis (tributyltin) Oxide for Shipbottom Paints:

BIOMET TBTO Antifoulant is an organotin compound, which will provide antifouling properties in marine paint formulations. Originally used solely in pleasure craft systems, BIOMET TBTO is now receiving wide acceptance in heavy marine systems as an adjunct to other antifouling ingredients.

The advantages of BIOMET TBTO Antifoulant are:

- Miscible in a wide range of resin and solvent systems.

- Compatibility with coating ingredients.

- Formulations with full range of colors.

- Non-corrosive to aluminum and steel.

- Low water solubilty.

- Broad spectrum control of marine life including barnacles, algae, tubeworms, and hydroids.

Typical Properties of BIOMET TBTO

Physical form: clear, straw colored liquid

Molecular weight: 596.0

% Assay as bis(tri-n-buty1tin oxide): 96

Specific gravity (25C/25C): 1.17

EPA Labeling

BIOMET TBTO brand of bis (tributyltin) oxide has been registered as an economic poison with the EPA by M&T--Registra-tion No. 5204-1. Paint formulations have also been registered with the EPA by M&T Chemicals, Inc.

It should be noted that each manufacturer must register his own formulation.

Genera] Information

BIOMET 14 Antimicrobial Compound is a new odorless preservative which provides effective control of gram negative microorganisms when used as an additive to flexible polyvinyl chloride systems. In addition, BIOMET 14 Antimicrobial Compound provides outstanding protection for PVC against mildew and from discoloration due to microbial action even under the most severe conditions of soil burial. The broad spectrum antimicrobial properties provided by the addition of BIOMET 14 Antimicrobial Compound to vinyl film has received approval for effectiveness and safety from the Environmental Protection Agency.

Physical and Chemical Properties(Typical)

Composition 10% solution of diphenyl-stibine

2-ethyl hexoate in diocty1phtha1 ate Appearance Clear, pale yellow liquid

Corrosiveness Noncorrosive to metal or glass

Density(calculated)

at 2 5C 1.0346

BIOMET 14 Antimicrobial Compound is registered with the Environmental Protection Agency, registration number 5204-42.

M&T CHEMICALS, INC.: BIOMET 430/45 Antifoulant for Marine Paints:

General Descript ion

BIOMET 430/45* is a stable dispersion of tri-n-butyltin fluoride in organic solvent which offers greater process flexibility and shorter milling times in paint manufacture than solid TBTF. This translates into lower manufacturing costs.

Equivalent to BIOMET TBTF in activity spectrum, the dispersion can be used successfully in a variety of coating formulations to achieve broad spectrum control of marine fouling thereby contributing to speed maintenance and operating economy.

The Advantages of BIOMET 430/45 Are:

1. Easily dispersible with Cowles or other high-speed mixers.

2. Gives uniform tine paint grind.

3. Non-dusting, easy to handle.

4. Compatible in conventional and organotin polymer based paint systems.

Composition

Active Ingredient: Inert Ingredients:

Tributyltin Fluoride

Seller makes no warranty, express or implied, concerning this product or its use other than the conditions of use indicated on its label bearing EPA registration 5204-61 and, subject thereto.

M A AG Agrochemicals, Inc. 155

An Industrial Fungicide to Control Mold and Mildew

Active Ingredient:

Copper-8-Quinolinolate 10%

Inert Ingredients: 90%

A Fungicide to Control Wood Decay

Description: NYTEK 10 is a formulation of copper-8-quinolinolate designed for the treatment of lumber used above ground by dip or pressure process to control wood decay.

Mold and Mildew Inhibitor for Paints and Adhesives

A Fungicide for Industrial Cotton Fabrics to Prevent Mold and Mi 1 dew

Description: For treating cotton duck, cotton webbing, rope and similar items which require copper-8-quinolinolate as the fungicide. Following is a partial list of Federal Specifications calling for the use of copper-8-quinolinolate as the mildew inhibitor.

MIL-D-504-C, Class B Dyeing and after treatment pro cesses for cotton duck and twill. MIL-R-1670 Rope, tent lay.

MIL-W-530E Webbing, textile, cotton.

MIL-R-1607C, Type 1 Treatment mildew resistant for rope.

MA AG AGROCHEMICALS, INC.: NYTEK 10WP:

An Industrial Fungicide to Control Mold and Mildew

Active Ingredient

Copper-8-Quinolinolate 10%

Inert Ingredients 90%

A Fungicide to Control Wood Decay

Description: Nytek 10WP is a water repellent formulation of copper-8-quinolinolate designed for the treatment of lumber by the dip or pressure process to control wood decay. For below ground use Nytek 10 WP will help prevent attack by wood boring beetles such as Anoblum punctatum Hylotrupes bajalus and Lyctus brunneus. It will also help prevent attack by termites.

A Fungicide for Industrial Cotton Fabrics to Prevent Mold and Mildew

Description: For treating cotton duck, cotton webbing, rope and similar items which require copper-8-quinolinolate as the fungicide. Following is a partial list of Federal Specifications calling for the use of copper-8-quinolinolate as the mold inhibitor:

MIL-D-504-C, Class B Dyeing and after treatment Pro cesses for Cotton Duck and Twill. MIL-R-1670 Rope, Tent Lay.

MIL-W-530E Webbing, Textile, Cotton

MIL-R-1607C, Type 1 Treatment Mildew Resistant for

Rope

MA AG Agrochemicals, Inc. 157

Active Ingredient:

Copper-8-Quinolinolate 1%

Inert Ingredients: 99%

Function and Applications

Containing copper-8-quinolinolate as the active ingredient, NYTEK 645 Penetrant Sealer is a ready-to-use, water-repellent preservative formulated to prevent the growth of fungi on interior structural materials inside food processing plants.

NYTEK 645 can be brushed or sprayed onto wood, concrete block tile and masonry used for walls, ceilings, floors and other structural Materials which support the growth of unsanitary mold or mildew.

MAAG AGROCHEMICALS, INC.: NYTEK WD:

Active Ingredient:

Copper-8-Quinolinolate 10%

Inert Ingredients 90%

Contains 0.90 lb. active ingredient per gallon

Mold and Mildew Inhibitor for Paints and Adhesives Mildew Inhibitor for Paper, Paperboard and Textiles A Fungicide to Control Wood Decay

Product Name:

BANROT:

Broad Spectrum Fungicide 40% Wettable Powder

For control of damping-off, root and stem rot diseases caused by Pythium, Phytophthora, Rhizoctonia, Fusarium and Thielaviop-sis in ornamental and nursery crops.

- Combines the effectiveness of TRUBAN against Pythium and Phytophthora with the systemic activity of Dimethyl 4, 4-o-phenylenebis (3-thioallophanate) against Fusarium, Rhizoctonia, and Thielaviopsis.

- More economical. Cost in use is a fraction of that for other fungicides which may have a lower per pound price but require multiple applications for control.

- Fungicidal, not just fungistatic. BANROT kills the organism rather than simply supressing it.

- Eliminates separate fungicides, which may not be compatible, to obtain broad spectrum disease control.

- Long lasting. Due to the residual qualities of BANROT'S components it reduces number of applications needed for control.

Active Ingredients

5-Ethoxy-3-trichloro-methyl-l,2,4-thiadazole 15%

Dimethyl 4,41-o-Phenylenebis (3-thioallophanate) 25%

Inert Ingredients 60%

EPA Registration No. 372-46 EPA Establishment No. 228-IL-l

MALLINCKRODT, INC.: Products for Horticulture(Continued):

Product Name:

MILBAN Brand Mildew Fungicide

39% Emulsifiable Concentrate for Control of Powdery Mildew

- Outstanding effective in eradicating powdery mildew.

- Suppresses subsequent formation of powdery mildew.

- Non-phytotoxic to more than 200 varieties of roses.

- Leaves no visible sprays spots on foliage.

- Gives American growers an advantage foreign growers have had for years.

- Developed expressly for commercial rose growers.

- Proven in use by professional growers.

Active Ingredient:

4-Cyclododecy1-2,6-Dimethy1-morpolinium Acetate* 39%

Inert Ingredients: 61%

* Dodemorph acetate

EPA Registration No. 372-51

ORNALIN Contact Fungicide 50% Wettable Powder For Control of Diseases on Ornamental Plants

- Especially effective against Botrytis (Gray Mold). ORNALIN stops the fungus even after a plant is infected, preventing further plant disfigurement.

- First Mallinckrodt fungicide labeled for use in bulb or corm crops. ORNALIN is also a special fungicide for use with ornamental herbaceous and woody plants. It works in the greenhouse or outdoors.

- No unsightly residue. And ORNALIN is particularly adaptable for programmed usage.

- Proven performance in Europe. For the past five years in Europe, ORNALIN has beaten all competitors in commercial use application.

- Does not inhibit root growth on cuttings taken from stock blocks which have been treated with ORNALIN.

- Low mammalian toxicity.

- Economical. Mix just .5 to 1 lb. of ORNALIN per 100 gallons of water. It offers excellent mixing qualities.

Active Ingredient:

3-(3,5-dichlorophenyl)-5-ethenyl-5-methy1-2,4-oxazo-

1idione Inert Ingredients:

Total :

MALLINCKRODT, INC.: Products for Horticulture(Continued):

Product:

TRUBAN 5-G Fungicide:

For control of damping-off root and stem rot diseases caused by Pythium and Phytophthora in ornamental and nursery crops.

- Eliminates need for initial drenching.

- Easy to incorporate - thorough distribution mix maximizes protection.

- Compatible with other granular materials for application purposes.

- Ideal for newly potted or shifted plant materials.

- No skips from careless drenching. Every pot is protected.

- Can be used in greenhouses or outdoors, with bedding plants and on unrooted cuttings in propagation bed.

- Cost-in-use is comparable to, or less than, drenching.

Active Ingredient:

5-Ethoxy-3-trichloro-methyl-1,2,4-thiadiazole* 5%

Inert Ingredients: 95%

MALLINCKRODT, INC: Products for Horticulture(Continued): Product Name: TRUBAN Flowable

Fungicide for control of damping off root and stem rot diseases causes by Pythium and Phytophthora in ornamental and nursery crops.

- Easy to use and store - a convenient quart!

- "Warning" label only - a super safe product.

- Although "semi-liquid" it is off the "danger" list.

- After original mixing in the tank, it does not need constant agitation.

- Works beautifully at very low rates; a more than acceptable cost-in-use.

- Higher active ingredient concentration means a smaller solvent amount - greater safety to your plants.

Active Ingredient:

5-Ethoxy-3-trichloromethy1-1,2,4-thiadiazole* 40.7%

Inert Ingredients: 59.3%

* Licensed under U.S. Patents 3,260,588 & 3,260,725

MALLINCKRODT, INC.: Products for Horticulture(Continued):

Product Name:

TRUBAN Fungicide 25% Emulsifiable Concentrate

For prevention and control of damping-off, root and stem rot diseases caused by Pythium and Phytophthora in ornamental and nursery crops.

- More economical. Cost in use is a fraction of that of other fungicides which may have a lower per pound price but require multiple applications for control

- Fungicidal, not fungistatic. TRUBAN kills disease organisms, doesn't merely suppress them.

- Requires little or no agitation after the initial mixing.

- Stronger root systems. TRUBAN-treated plants are rapid growers, of high quality and may be marketed earlier.

- Stable in sunlight. Apply TRUBAN during any suitable portion of the day without loss of effectivenesc. No need to protect solutions from light.

Active Ingredients:

5-Ethoxy-3-trichloro-methy1-1,2,4-thiadiazole* 25%

Inert Ingredients: 75%

* Licensed under U. S. Patents 3,260,588 and 3,260,725

Product Name:

TRUBAN Fungicide 30% Wettable Powder

For prevention and control of diseases caused by Pythium and

Phytophthora in ornamental and nursery crops.

- Economical. Cost in use is a fraction of that of other fungicides which may have a lower per pound price but require multiple applications for control

- Fungicidal, not fungistatic. TRUBAN kills disease organisms, doesn't merely suppress them.

- Long-lasting. TRUBAN reduces the number of applications needed for control.

- Stronger root systems. TRUBAN-treated plants result in high-quality, rapid growing plants that can be marketed ear 1ier.

- Stable in sunlight. Apply TRUBAN during any suitable portion of the day without loss of effectiveness. No need to protect solutions from light.

Active Ingredient:

5-Ethoxy-3-trichloro-methyl-l,2,4-thiadiazole* 30%

Inert Ingredients: 70%

* Licensed under U.S. Patents 3,260,588 and 3,260,725

MALLINCKRODT, INC.: Products for Horticulture(Continued):

Product Name:

Oplan Termites

Oplan Termites

You Might Start Missing Your Termites After Kickin'em Out. After All, They Have Been Your Roommates For Quite A While. Enraged With How The Termites Have Eaten Up Your Antique Furniture? Can't Wait To Have Them Exterminated Completely From The Face Of The Earth? Fret Not. We Will Tell You How To Get Rid Of Them From Your House At Least. If Not From The Face The Earth.

Get My Free Ebook


Responses

  • GILDO
    What is tribucide pressure treated plywood?
    6 years ago

Post a comment