Chartrecorders

A complete new system would have the benefit of system-control and data processing via a personal computer and proprietary software. An in-house system, however, would probably output readings to a chart-recorder. This can give a further opportunity of adjusting the scale-expansion to accommodate extra-low or extra-high peaks. It is useful to be able to vary the chart speed; this will allow the peak width to be kept at an optimum width despite any variation of the sampling rate with different methodologies. Continuous-flow methodologies mean that the recorder is left running unattended for long periods. It is vital that the sprocket pins at each end of the chart paper drive are long enough to engage positively in the holes in the paper. It is annoying to find that they slip out, perhaps at one end, and an hour's readings are wasted. It could be that the holes are fractionally out of sync with the pins, or that the paper has buckled at the end. We found with our in-house systems that a friction drive avoided these problems. The Houston Instrument OmniScribe® is of the friction type. Alternatively, a couple of large bulldogclips attached to the end of the chart that overhangs the bench may solve the problem.

0 0

Post a comment