Chemistry module

The outflow end of the pump tubing is connected directly to the components of the chemistry module. This module consists mainly of connectors and glass mixing coils. Proprietary modules are available, of course, but it is perfectly feasible to assemble the necessary components on a plastic tray fitted with four legs. Pump tubing and connectors are available from many suppliers. Apart from the OEMs, sources include:

Gradko International Ltd: http://members.aol.com/gradkoin/ homepage.htm, who can also supply refurbished modules.

Industrial 8.5-ml autoanalyser cups (Part No. 127-0080-01) are available from:

Gradko (see above); or

LIP (Equipment & Services) Ltd, 111 Dockfield Road, Shipley, West Yorkshire BD17 7SJ, UK. Tel: +44 (0) 1274 593411 Fax: +44 (0) 1274 589439.

The advantage of the 8.5 ml as opposed to the 2-ml or 4-ml conical cups, is that it is easier to pour into them, several analyses are possible before they need refilling, and they are more easily washed if reuse is considered. The snag is that the 40-place 8.5-ml industrial cup sample trays are no longer made by Bran+Luebbe, but Gradko can supply them for about £112 each.

In case these sample trays become unavailable, a dimensional diagram is given in Fig. 1.1b of a simplified version. The original trays were made from a glass fibre filled resin. It is suggested that suitable materials would be Nylon 66 rod, 25 mm diameter for the handle; cast Nylon 6 rod, 100 mm diameter for the underside; cast Nylon 6 available as 10 x 500 x 500 mm sheet, sufficient for four trays. These are available from RS Components Ltd, at the website: http://rswww.com

Pump tubing is supplied by the above sources, also Elkay Laboratory Products UK Ltd:

http://www.elkay-uk.co.uk/

0 0

Post a comment