Info

rTi /rr
Deto/I of post at top

SAW FILING CLAMP

Stock Bill

I%"x3%"x4' 0 il"x3%"x22" H"x4"x2' 8"

Hardwood block for tapping clamps in slot to hold saw.

Posts

Braces

Clamps

18 6d common nails to fasten braces. 2 carriage bolts }4"x4" to strengthen posts at top. 24" of a heavy cord to attach hardwood block. 2 poultry netting staples to fasten cord to block and top brace.

Directions

The height of the posts, which is four feet, is a convenient size for a person of average size. It may be varied to suit the individual.

The clamps as called for in the drawing and stock bill are 32" long. This is a size suitable for the average handsaws. Longer clamps and deeper cuts at top of posts will be found more satisfactory for big crosscut saws.

The hardwood block is a convenience for tapping the clamps in the notches when the saw is in place between the clamps. It is placed over the saw and clamps directly over the posts and tapped firmly with a hammer. By its use the saw is not hit with or the clamps marred by the hammer.

FARM TOOL BOX Bill of Material

Use hardwood for handle and any soft wood for rest of box.

Pieces Dimensions Use

2 %"xl0"xl2" Ends

2 ya"x3%"x20%" Sides of box

1 1/2/'x2%"x20V2" Bottom of nail tray

2 y2"x2%"x20#" Sides of nail tray

3 %"xl%"x4%" Partitions in nail tray 1 %" round x21" long * Handle

Hardware: 2 flat head bright wood screws 2" No. 10 for handle.

2 doz. 6d. finishing nails.

4 doz. 4d. finishing nails.

Directions

For fastening handle see direction on "Berry Stand."

For construction of handle see "Vise Handle.'9

The purpose of this tool box is to furnish a means of carrying a quantity of tools, nails, screws, staples, etc, to any point about the farm where wTork is to be done. For example, a repair and construction job may require the following: cross-cut saw, pinch bar, hand ax, claw hammer, staple puller, wire stretcher, nails and staples. These tools may all be placed in the box and carried conveniently as well as kept together.

Fig. 13. Farm Tool Box.

WOOD BOX

Lumber Stock Bill

Lumber: (6" matched flooring).

Pieces

Dimensions

Use

2

il"x2"xl8%"

Sills

4

i§"x5ft"x2' 10%"

Floor

6

ig"x5}4"x3' 0"

Front

7

i§"x5 Vx8' 0"

Back

13

Ends

2

*g"x2"x2' 2%"

Front posts

2

it"x2"x2' 11%"

Back posts

4

tt"xB%wx3' 2"

Door

2

*rx2"xl7y2"

Door straps

2

*§"x2"x20"

Cleats for ends at top

1

}|"x4"x3' 2"

Top

Hardware: 16 6d common nails for nailing floor to sills.

1 % lb. 8d finishing nails for assembling box.

28 flat head bright wood screws No. 8 for fastening straps to door and cleats to ends.

2 light T hinges.

Hardware: 16 6d common nails for nailing floor to sills.

1 % lb. 8d finishing nails for assembling box.

28 flat head bright wood screws No. 8 for fastening straps to door and cleats to ends.

2 light T hinges.

Directions

In assembling the box the floor boards are nailed to the sills with 6d common nails and the nails are clinched.

The bottom end boards are fastened to the floor with three 8d finishing nails into the end of each floor board. The end boards are fastened to the posts with three 8d finishing nails at each end of each board. The cleats at the top are fastened to the top end boards with three iy2" No. 8 flat head bright screws placed from the inside.

The front and back boards are secured by placing two 8d finishing nails at each end of each board into the ends of the end pieces and two into the post. Those in the post are clinched on the inside.

The top board is fastened in place with 8d finishing nails.

In assembling the door the boards should be drawn tightly together with clamps. The straps are then placed in position and fastened by placing two 1 y£ No. 8 flat head wood screws into each board at each strap, placing the screws from the inside of the door.

Bevel the top edge of the door and fasten the door in place.

Set the nails with a nail set; putty the holes, and paint the box a color suitable for the room where it is to be placed.

5lock Bill Pieces Dimensions Use 4. ¿"xai'xj-o" Posts 6 ¿'a x io" Cleafs 6

6d common nails x /oMx 3'-io£ Shelves

6d common nails

Fruit Con Rack

1 piece fx\o£xao£ -bottom 4 « fx 4"xio" -aides

2 » fx 4" x \o£ -ends 2 » f x av x i4" -posts i i. rroundxir -handle 2e-2"Nojo flat head wood screws 4-ad. finishing nails_

0 0

Post a comment